Skip to main content
Hudson logo
File #: AHBR 25-918    Version: Name:
Type: AHBR Application Status: New Business
File created: 8/8/2025 In control: Architectural & Historic Board of Review
On agenda: 12/10/2025 Final action:
Title: 2636 Sandstone Path New House (Single-Family Dwelling) Submitted by Norman Saeger, Architect a) Staff notes this application was informally reviewed at the October 29, 2025, AHBR meeting. b) The applicant has submitted a revised site plan and elevations for the Board's consideration. c) Section IV-3 (e)(4) of the Architectural Design Standards states the building shall have a typical window used for most windows. Question the rear elevation in relation to this requirement. Staff notes this building is oriented so the rear elevation would face the side elevation of the abutting lot. d) Section IV-4(b)2) states the front face of the main body must sit at least 18" from the face of the wings. Staff notes the garage wing is proposed in line with the main mass. e) Question if the proposed foundational height and grade line is accurately depicted. f) Verify the stone applied along the front wall terminates at an inside corner. g) Submit addition detail for the front door design. h) Su...
Attachments: 1. 2636 Sandstone Path - AHBR Packet 12.10.2025, 2. 2636 Sandstone Path - Packet for AHBR 10.29.2025

Title

2636 Sandstone Path

New House (Single-Family Dwelling)

Submitted by Norman Saeger, Architect

a)                     Staff notes this application was informally reviewed at the October 29, 2025, AHBR meeting.

b)                     The applicant has submitted a revised site plan and elevations for the Board’s consideration.

c)                     Section IV-3 (e)(4) of the Architectural Design Standards states the building shall have a typical window used for most windows. Question the rear elevation in relation to this requirement.  Staff notes this building is oriented so the rear elevation would face the side elevation of the abutting lot.  

d)                     Section IV-4(b)2) states the front face of the main body must sit at least 18” from the face of the wings.  Staff notes the garage wing is proposed in line with the main mass. 

e)                     Question if the proposed foundational height and grade line is accurately depicted.

f)                     Verify the stone applied along the front wall terminates at an inside corner.

g)                     Submit addition detail for the front door design.

h)                     Submit product specification sheets for the proposed siding, foundation, windows, and shingles.  

i)                     Suggest reducing the size of the transom window over the secondary front doorway to be more proportionate with the size of the door opening.