Title
5740 Nottingham Gate Boulevard
Addition (Primary Bedroom & Basement)
Submitted by Brian Kuck
a) Section IV-4(b)(2) of the Architectural Design Standards state “The front face of the main body must sit forward at least 18" from the front face of the wings.” Staff notes the proposed wing addition would sit forward of the main mass. Revise elevations to meet this requirement.
b) Section IV-4(d)(3) of the Architectural Design Standards states that the materials used in any mass must be applied consistently on that mass on all sides of the structure. Revise elevations to depict a consistent wall material applied around all sides of the proposed wing addition.
c) Section III-1(g)(8) of the Architectural Design Standards state that large expanses of blank wall are to be avoided. Fenestration placement should be at a maximum of approximately every 12 feet. Suggest additional fenestration on the west side elevation to meet this requirement.
d) Section III-1(g)(8) of the Architectural Design Standards state that exposed foundations and tie courses shall be consistent on all elevations. Revised elevations to depict consistent foundation height/water table to meet this requirement.
e) Submit east-side elevation for proposed wing addition.