Skip to main content
Hudson logo
File #: AHBR 25-1075    Version: 1 Name:
Type: AHBR Application Status: New Business
File created: 10/1/2025 In control: Architectural & Historic Board of Review
On agenda: 10/8/2025 Final action:
Title: 6420 Lost Woods Ln Addition (Bedroom & Bathroom) Submitted by Quinn Miller, Peninsula Architects a) Section IV-4(b)(2) of the Architectural Design Standards state "The front face of the main body must sit forward at least 18" from the front face of the wings." Additionally, Section IV4(h)(1) states "The wing must be attached at the rear or side of the building and may not extend forward of the main body" Staff notes the proposed addition would extend in front of the main body approximately 6 ft. Revise the projection to meet this requirement. b) Section IV-4(g)(4) of the Architectural Design Standards state projections on the ground floor should be carried through the foundation. Revise the front and rear bay window projections to depict a full foundation underneath. c) Section IV-(f)(2) of the Architectural Design Standards states that details in a wing must be consistently applied throughout the sides of that wing. Revise elevations to depict shutters consistently applied around the...
Attachments: 1. 6420 Lost Woods Ln - AHBR Packet
Date Ver.Action ByActionResultAction DetailsMeeting DetailsVideo
No records to display.

Title

6420 Lost Woods Ln

Addition (Bedroom & Bathroom)

Submitted by Quinn Miller, Peninsula Architects

a)                     Section IV-4(b)(2) of the Architectural Design Standards state “The front face of the main body must sit forward at least 18" from the front face of the wings.” Additionally, Section IV4(h)(1) states “The wing must be attached at the rear or side of the building and may not extend forward of the main body” Staff notes the proposed addition would extend in front of the main body approximately 6 ft. Revise the projection to meet this requirement.

b)                     Section IV-4(g)(4) of the Architectural Design Standards state projections on the ground floor should be carried through the foundation. Revise the front and rear bay window projections to depict a full foundation underneath.

c)                     Section IV-(f)(2) of the Architectural Design Standards states that details in a wing must be consistently applied throughout the sides of that wing. Revise elevations to depict shutters consistently applied around the proposed wing addition.

d)                     Submit spec sheets of all proposed exterior materials.