Skip to main content
Hudson logo
File #: AHBR 2024-60    Version: 1 Name:
Type: AHBR Application Status: New Business
File created: 12/3/2025 In control: Architectural & Historic Board of Review
On agenda: 12/10/2025 Final action:
Title: 1101 Barlow Rd (Ellsworth Meadows Golf Course) New Construction (Clubhouse) Submitted by Trent Wash a) Staff notes this application was approved by the Board at the December 13, 2023, AHBR meeting. b) During a follow up site inspection, Community Development staff observed changes in design. Staff has prepared the attached document depicting the observed changes. c) Staff notes the following design changes are in conflict with the Architectural Design Standards a. Section IV-4 (d)(3) of the Architectural Design Standards state that the materials used in any mass must be applied consistently on that mass on all sides of the structure. Staff notes the installation of horizontal siding on the front elevation projection. This could be remedied by replacing the horizontal siding with vertical to match the rest of the building or taking the horizontal siding back to an inside corner and painting the opposite 6" return gray. b. Section III-1 (g)(8) of the Architectural Design Standards state ...
Attachments: 1. 1101 Barlow Rd Changes - AHBR Packet 12.10.2025 Meeting, 2. 1101 Barlow Rd. AHBR Packet 12.13.2023 Meeting
Date Ver.Action ByActionResultAction DetailsMeeting DetailsVideo
No records to display.

Title

1101 Barlow Rd (Ellsworth Meadows Golf Course)

New Construction (Clubhouse)

Submitted by Trent Wash

a)                     Staff notes this application was approved by the Board at the December 13, 2023, AHBR meeting.

b)                     During a follow up site inspection, Community Development staff observed changes in design. Staff has prepared the attached document depicting the observed changes.

c)                     Staff notes the following design changes are in conflict with the Architectural Design Standards

a.                     Section IV-4 (d)(3) of the Architectural Design Standards state that the materials used in any mass must be applied consistently on that mass on all sides of the structure. Staff notes the installation of horizontal siding on the front elevation projection. This could be remedied by replacing the horizontal siding with vertical to match the rest of the building or taking the horizontal siding back to an inside corner and painting the opposite 6” return gray.

b.                     Section III-1 (g)(8) of the Architectural Design Standards state that large expanses of blank wall are to be avoided. Fenestration placement should be at a maximum of approximately every 12 feet. Staff notes fenestration issues on the side and rear elevations; however, the AHBR could consider granting a waiver based on the significant setback of the structure and fact the windows are not located on the front facade.